| home | products | about us | careers | contact us|


Event Data Recorder
FRA & IEEE 1482.1-1999 Compliance
Vigilance Systems (Alerter)
Horn Sequencer
Auxiliary Light Control
Integrated Speedometer Control
Remote Download Port

Integrated Systems
TraxSyte® - Digital Video Recording System
Priority Alarm System

Speed Indicators
Analog Speed Indicator
LED Speed Indicator
Digital Speed Indicator
Model 7 Speed Verifier
Odometer

Sensors
Axle Alternator
Doppler Speed System
Isolation Amplifier 54114
Traction Motor Current Monitor
Railroad Multimeter

Control Systems
Engine Temperature Controller
Electronic Power Filter
Electronic Transition Control

Diagnostic Test Equipment
Automated Bench Test Equipment
   

Railroad Multimeter

Authorized US Repair Center
Scherrer Instruments
7170 Manchester Ave.
St. Louis, MO. 63143
Tel: 800-527-8894

Authorized Canadian Repair Center
Bates Electronics
411 Industrial Rd. Unit 8
London, Ontario N5V 3L3
Tel: 519-451-8830
Fax: 519-451-2661

The TS111 is discontinued, and replaced by the Simpson TS113. Parts and service remain available for the TS111 from the Authorized Repair Centers listed below.

The Bach-Simpson™ TS111-3W Multimeter is a rugged, reliable instrument specifically designed to provide the widest range of electrical measurements associated with the railway signaling and communications field.

The intrinsic ruggedness of a completely enclosed Bach-Simpson™ "core-magnetic" movement is self-shielding and virtually immune to external field influence. Spring-backed jewels assist in the preservation of original instrument accuracy in everyday use. The movement is safeguarded by a shunt diode, limiting the otherwise damaging acceleration.

The 4'h" mirrored scale, knife edge pointer and highly legible markings, permit improved resolution of readings and elimination of parallax errors.

Features

  • Adjustable pointer stop facilitates peak readings of pulsating voltage or current on coded track.
  • Single selection switch for accurate function and range position.
  • Accurate measurement of AC voltage event when superimposed on a DC track signal.
  • " On" time percentage measurement read directly from meter scale with no pointer oscillation.
  • OHMS range safety device indicates the presence of AC or DC voltage when making a resistance measurement.
    Special test lead set and heavy leather carrying case included.
  • Your Bach-Simpson™ representative is prepared to discuss your requirements.

Specifications

    DC Voltage
    • Ranges: 600 mV, 3 V, 15 V. 60 V, 300 V - 1 KU per volt
    • Accuracy: :±2% Full Scale (±I% Full Scale on 3 V Range)

    AC Voltage
    • Ranges: 3 V, 15 V, 150 V, 600 V - 300 i2 per volt
    • Accuracy: ±3% Full Scale

    Resistance
    • Ranges: R x 1, R x 100 - Center Value: 5 L2
    • Accuracy: ±5% of Center Scale, ±l 0% of Scale End

    Current
    • DC Ranges: 15 mA, 60 mA, 300 mA, 1.5 A, 6 A, 30 A
    • AC Ranges: 3 A, 30 A

    Percent "ON"
    • Time: 0-100% (for Pulses Over 30 per Minute)
    • Accuracy: ±2% Full Scale (10-60% "On" Time at 30 Pulses per Minute and 10-100% "On" Time at 180 Pulses per Minute)

    Physical
    • Dimensions: 9.5" (H) x 6.2" (W) x 4.,V'(D), (24 x 16 x 11 cm)
    • Weight: 4.3 lbs. (2kg)

Ordering & Pricing Information

    Part Number:
    • TS111-3W Railroad Tester
      includes Test Lead Set and Carrying Case - 47797W

    Accessories:
    • Test Lead Set - 15493
    • Carrying Case, Leather - 1690

     

home - products - about us - contact us - careers
home